ISO 9001:2015 certified · Cert. 26UQAG38 D-U-N-S® 581618532 +91 99250 60595 info@magnussourcing.com
Rubber & silicone moulding

Rubber and silicone moulding in India

Seals, gaskets, bellows and rubber-to-metal bonded parts in the elastomer your application needs.

Industrial component with rubber and metal parts
In short

Magnus Sourcing supplies custom moulded rubber and silicone parts from Indian manufacturers using compression, transfer and injection moulding and extrusion. Materials include NBR, EPDM, FKM (Viton-type), silicone (VMQ), neoprene (CR) and natural rubber, in hardness from about 30 to 90 Shore A, including rubber-to-metal bonded parts.

Typical capabilitySpec sheet
ProcessesCompression, transfer, injection moulding, extrusion
MaterialsNBR, EPDM, FKM, VMQ silicone, CR, NR, HNBR
Hardness30–90 Shore A
Bonded partsRubber-to-metal bonding on cast or machined inserts
TestingHardness, tensile, compression set, ageing

Typical ranges across our supplier network. Final values depend on part geometry, alloy and volume, and are confirmed on your drawing.

Choosing an elastomer

MaterialGood forTypical temperature range
NBR (nitrile)Oils, fuels, hydraulic fluids−30 to +100 °C
EPDMWater, steam, weathering, ozone−40 to +130 °C
FKM (Viton-type)Fuels, chemicals, high temperature−20 to +200 °C
Silicone (VMQ)Food contact, wide temperature range−60 to +200 °C
Neoprene (CR)General purpose, moderate oil resistance−35 to +100 °C

Typical parts

Flange and pump gaskets, O-rings and lip seals, valve seats and diaphragms, anti-vibration mounts, bellows and boots, grommets, and rubber-lined or bonded valve discs.

Related

Keep exploring

Automated robotic production cell on a manufacturing line
Polymers

Plastic injection

Moulds and moulded parts in engineering plastics, sourced with your metal parts.

Learn more
Industrial gate valves with cast steel bodies

Pumps & valves

Valve bodies, impellers, casings and trim, hydro tested.

Learn more
Workstation assembly line
Turnkey

Assemblies

Cast, machined and fabricated parts built into tested sub-assemblies.

Learn more

Send a drawing, get a plan

Quote within 48 hours. Samples in 4–8 weeks.

Upload a drawing or 3D model. An engineer reviews manufacturability, recommends the process and material, and comes back with a quote and a sample timeline. No cost or commitment, and we sign your NDA before anything is shared.