ISO 9001:2015 certified · Cert. 26UQAG38 D-U-N-S® 581618532 +91 99250 60595 info@magnussourcing.com
Material · Steel

Carbon and alloy steel castings

Pressure-rated valve steels, low-temperature grades and heat-treatable alloy steels, cast or forged.

Carbon steel valve castings and billets at a production plant
In short

Magnus Sourcing supplies carbon and low-alloy steel castings and forgings in ASTM A216 WCB and WCC, A352 LCB and LCC for low-temperature service, A217 WC6 and WC9 for high temperature, and AISI 1020–1045, 4130, 4140 and 8620 for engineering parts, normalised, quenched and tempered or case hardened to specification.

Typical capabilitySpec sheet
Pressure gradesASTM A216 WCB, WCC
Low temperatureASTM A352 LCB, LCC (impact tested)
High temperatureASTM A217 WC6, WC9, C5
Engineering steels1020, 1030, 1045, 4130, 4140, 4340, 8620
EN / DINGP240GH (1.0619), G20Mn5, 42CrMo4, GS-C25
Heat treatmentNormalise, N+T, Q+T, carburise

Typical ranges across our supplier network. Final values depend on part geometry, alloy and volume, and are confirmed on your drawing.

Choosing a steel grade

GradeStrength (min. tensile)Use
WCB485 MPaValve and pump bodies, general pressure parts
WCC485 MPa (better weldability)Pressure parts needing more toughness
LCB / LCC450 / 485 MPa, impact tested at −46 °CCryogenic and cold-climate valves
WC6 / WC9485 MPaSteam and high-temperature service
4140 (42CrMo4)Up to about 1,000 MPa (Q+T)Shafts, gears, high-load parts

Values are typical minimums from the relevant ASTM standards; your drawing or purchase specification governs.

Related

Keep exploring

Cast and machined valve body

Valve bodies & trim

Bodies, bonnets, discs and trim in WCB, CF8M, duplex and ductile iron.

Learn more
Red-hot steel billet on an open-die forging press
Strength

Forging

Closed-die, open-die and ring-rolled steel forgings, heat treated and machined.

Learn more
Oil refinery processing towers at dusk

Oil & gas

High-pressure castings, forgings and flanges with NACE compliance.

Learn more

Send a drawing, get a plan

Quote within 48 hours. Samples in 4–8 weeks.

Upload a drawing or 3D model. An engineer reviews manufacturability, recommends the process and material, and comes back with a quote and a sample timeline. No cost or commitment, and we sign your NDA before anything is shared.