Reference
Casting and sourcing glossary
Plain-English definitions of the terms you will meet when sourcing metal parts.
Terms A–Z
- AQL (acceptable quality limit)
- The maximum defect rate considered acceptable in a sampling inspection plan, defined in ISO 2859-1. A lower AQL means stricter inspection.
- CT / DCTG (casting tolerance grade)
- Dimensional casting tolerance grade from ISO 8062-3, from 1 (tightest) to 16. See the casting tolerance guide.
- CMM
- Coordinate measuring machine: a probe-based instrument that measures part geometry in 3D against the drawing or CAD.
- Core
- A sand or ceramic insert placed in a mould to form internal passages or cavities in a casting.
- DDP (Delivered Duty Paid)
- An Incoterm under which the seller delivers to the buyer’s premises and pays freight, import duties and taxes.
- Draft
- A taper on casting or forging walls (typically 1–3°) that lets the pattern or part release from the mould or die.
- EN 10204 3.1 certificate
- A material test certificate issued by the manufacturer’s independent inspection department, stating actual chemical and mechanical test results for the heat supplied. A 3.2 certificate is also validated by a third party.
- FAI (first article inspection)
- Full measurement and verification of the first production parts against every drawing requirement, often to AS9102 in aerospace.
- Feeder (riser)
- A reservoir of molten metal attached to a casting that feeds the casting as it shrinks during solidification, preventing shrinkage cavities.
- FOB (Free On Board)
- An Incoterm under which the seller loads goods on the vessel at the named port of export; the buyer pays sea freight onwards.
- Gating system
- The channels (sprue, runners, gates) that carry molten metal into the mould cavity.
- Heat
- One melt of metal from a furnace. Castings from the same heat share chemistry and are traced by heat number.
- Investment casting
- A precision casting process using a wax pattern coated in ceramic to make a one-piece mould; also called lost-wax casting. More.
- MPI (magnetic particle inspection)
- An NDT method that reveals surface and near-surface cracks in ferromagnetic materials using a magnetic field and iron particles.
- MTC
- Mill or material test certificate. See EN 10204 3.1.
- NDT (non-destructive testing)
- Inspection methods that find defects without damaging the part, such as RT, UT, MPI and DPT. More.
- Nodularity
- The percentage of graphite in ductile iron that is spherical; usually 80–90% or more is specified.
- Pattern
- A replica of the part (wood, resin, metal or wax) used to form the mould cavity, made slightly oversize to allow for shrinkage.
- PMI (positive material identification)
- Verification of alloy composition on finished parts, usually with handheld XRF, to prevent mixed grades.
- PPAP
- Production Part Approval Process: the automotive-industry standard package proving a supplier can make the part consistently. More.
- Porosity
- Small voids in a casting caused by gas or shrinkage during solidification.
- RT (radiographic testing)
- X-ray or gamma-ray imaging that reveals internal casting defects.
- Silica sol
- Colloidal silica binder used in investment casting shells; gives better surface finish and accuracy than water glass.
- Solution annealing
- Heat treatment of austenitic stainless steel at high temperature followed by rapid cooling, to dissolve carbides and restore corrosion resistance.
- UT (ultrasonic testing)
- An NDT method that uses high-frequency sound to detect internal flaws, common for forgings and thick castings.
- Water glass
- Sodium silicate binder used in lower-cost investment casting shells, mainly for carbon and low-alloy steel parts.
- Yield (casting yield)
- The ratio of finished casting weight to total poured weight including gates and feeders.
Related