ISO 9001:2015 certified · Cert. 26UQAG38 D-U-N-S® 581618532 +91 99250 60595 info@magnussourcing.com
Quality · NDT

Non-destructive testing (NDT)

Find internal and surface defects without damaging the part: radiography, ultrasonic, magnetic particle and dye penetrant testing.

Inspector reviewing a test report with a magnifying glass
In short

Magnus Sourcing arranges non-destructive testing of castings, forgings and welds at our suppliers and accredited labs in India: radiography (RT), ultrasonic testing (UT), magnetic particle inspection (MPI) and dye penetrant testing (DPT), performed by ASNT or ISO 9712 Level II qualified technicians, with acceptance criteria and reports to your specification.

Typical capabilitySpec sheet
Radiography (RT)X-ray and gamma; ASTM E446, E186, E280; ASME B16.34 App. I
Ultrasonic (UT)ASTM A609 (castings), A388 (forgings), EN 12680
Magnetic particle (MPI)ASTM E709, E125; EN 1369
Dye penetrant (DPT)ASTM E165, E433; EN 1371
PersonnelASNT SNT-TC-1A / ISO 9712 Level II

Typical ranges across our supplier network. Final values depend on part geometry, alloy and volume, and are confirmed on your drawing.

Which NDT method for which defect

MethodFindsWorks onTypical use
Radiography (RT)Internal porosity, shrinkage, inclusionsAll metalsPressure-retaining valve and pump castings
Ultrasonic (UT)Internal cracks, laminations, voidsMost metals, thicker sectionsForgings, shafts, heavy castings
Magnetic particle (MPI)Surface and near-surface cracksFerromagnetic steels and ironForgings, carbon steel castings, welds
Dye penetrant (DPT)Surface-breaking cracks and porosityAll non-porous materialsStainless and aluminium castings, machined faces
Related

Keep exploring

Engineering analysis of a cast component

Material testing

Spectro, PMI, tensile, hardness, impact and microstructure.

Learn more
Cast and machined valve body

Valve bodies & trim

Bodies, bonnets, discs and trim in WCB, CF8M, duplex and ductile iron.

Learn more
Quality engineers reviewing inspection results on the shop floor

Quality & testing

Supplier audits, PPAP, NDT, CMM and pre-shipment inspection.

Learn more

Send a drawing, get a plan

Quote within 48 hours. Samples in 4–8 weeks.

Upload a drawing or 3D model. An engineer reviews manufacturability, recommends the process and material, and comes back with a quote and a sample timeline. No cost or commitment, and we sign your NDA before anything is shared.