ISO 9001:2015 certified · Cert. 26UQAG38 D-U-N-S® 581618532 +91 99250 60595 info@magnussourcing.com
Quality · Material testing

Material testing: chemistry, mechanical and microstructure

Proof that the metal is what the drawing says: chemistry, strength, toughness and structure.

Engineering analysis of a cast component
In short

Magnus Sourcing provides material testing for every heat of castings and forgings: optical emission spectrometer (spectro) chemical analysis, positive material identification (PMI), tensile and yield strength, elongation, Brinell or Rockwell hardness, Charpy impact at specified temperatures and microstructure examination, reported on EN 10204 3.1 certificates.

Typical capabilitySpec sheet
ChemistryOptical emission spectrometer per heat; PMI (XRF) on parts
TensileASTM A370 / E8, ISO 6892-1
HardnessBrinell (ASTM E10), Rockwell (E18), Vickers
ImpactCharpy V-notch, ASTM E23, down to −196 °C on request
MicrostructureNodularity (ISO 945), grain size (ASTM E112), ferrite content
CertificateEN 10204 3.1; 3.2 with third party

Typical ranges across our supplier network. Final values depend on part geometry, alloy and volume, and are confirmed on your drawing.

Spectro chemical analysis

A sample from each heat is analysed on an optical emission spectrometer before pouring is released, so off-chemistry melts are corrected, not shipped. For mixed-grade risks, finished parts are checked by handheld XRF (PMI).

Mechanical testing

Test bars, cast from the same heat and heat treated with the parts, are machined and pulled to confirm tensile strength, yield and elongation. Hardness is checked on the parts themselves. Impact testing is added for low-temperature grades such as LCB and LCC.

Microstructure analysis

Polished and etched samples show graphite form and nodularity in ductile iron, grain size and phase balance in duplex stainless, and carbide or inclusion levels in steels. It is the quickest way to confirm heat treatment worked.

Related

Keep exploring

Inspector reviewing a test report with a magnifying glass

NDT testing

RT, UT, MPI and DPT by qualified Level II technicians.

Learn more
Stainless steel gears and machined parts

Materials

Grades, standards and properties for every alloy we cast and forge.

Learn more

Send a drawing, get a plan

Quote within 48 hours. Samples in 4–8 weeks.

Upload a drawing or 3D model. An engineer reviews manufacturability, recommends the process and material, and comes back with a quote and a sample timeline. No cost or commitment, and we sign your NDA before anything is shared.