
Tool
Casting process selector
Answer five questions to see which casting processes suit your part, ranked by fit.
Describe your part
Enable JavaScript to see the ranking, or use the comparison table below.
The ranking is a rule-of-thumb guide based on typical process limits. For a firm recommendation, send us your drawing.
Process limits used by the tool
| Process | Alloys | Weight | Annual volume | Accuracy |
|---|---|---|---|---|
| Investment | Steel, stainless, nickel, copper, aluminium | 0.01–80 kg | 50–50,000 | High |
| Sand | Iron, steel, stainless, copper, aluminium | 0.5–5,000 kg | 1–20,000 | Standard |
| Shell mould | Iron, steel, stainless, copper | 0.2–50 kg | 500–100,000 | Good |
| Gravity die | Aluminium, brass | 0.1–50 kg | 1,000–100,000 | Good |
| Pressure die | Aluminium, zinc | 0.01–20 kg | 5,000–1,000,000 | High |
| Centrifugal | Copper, stainless, steel, iron, nickel | 1–3,000 kg | 1–20,000 | Machined |
Related
Keep exploring


Die vs investment casting
Material, volume and geometry decide it. Here is how to choose.
Learn more