
Metal flow and solidification simulation
Predict shrinkage and porosity on screen, before any tooling is cut or metal is poured.

Metal flow and solidification simulation models how molten metal fills a mould and cools, predicting shrinkage, porosity, cold shuts and hot spots. Magnus Sourcing uses casting simulation for pressure-retaining and critical castings to design gating and feeders before tooling, which shortens sampling and lowers scrap.
| Predicts | Fill pattern, hot spots, shrinkage porosity, cold shuts, air entrapment |
|---|---|
| Applied to | Investment, sand, shell and gravity die castings |
| Output | Modulus and solidification maps, feeder and gating design |
Typical ranges across our supplier network. Final values depend on part geometry, alloy and volume, and are confirmed on your drawing.
Why simulate
A failed sample costs weeks: new tooling changes, another pour, another round of X-ray. Simulation moves those iterations onto the computer. The image above shows a thermal-modulus map: red zones solidify last and need feeding, and the green feeders on top are placed to supply them.
Keep exploring



Valve bodies & trim
Bodies, bonnets, discs and trim in WCB, CF8M, duplex and ductile iron.
Learn more